- Pro-ject Debut Carbon Usb Manual
- Pro-ject Debut Carbon Manuale Italiano
- Pro Ject Debut Carbon Manual
- Pro Ject Debut Carbon Walnut
Confusing user manual. Pro-Ject has really positioned themselves as the authority in the mid-range segment of the market. Their Pro-Ject Debut Carbon Esprit SB is among the best turntables to get under $1000, and it fully justifies Pro-Ject’s current popularity. PS00-Wave is a joint project of Pro-Ject Audio Systems and Parov Stelar, that sets an audio landmark!Based on the worldwide highly acclaimed DEBUT CARBON ESPRIT (DC), which sets a new standard for analogue turntables for the next decade.PS00-Frida is a real eye-catcher and meets the growing demand of all fans of high-class, but affordable vinyl record players and attracts real Parov.
Pro-ject turntables are designed in Austria and the UK then built at the Litovel factory in the Czech Republic. Widely available and offering very good performance at each price level, the brand has gained much recognition over the last ten years and continues to develop new models. Read online or download PDF. Page 5 / 8. Pro-Ject Audio Systems Pro-Ject Debut Carbon Esprit (DC) User Manual. Pro-Ject Audio Systems CD-players. Manuals Directory ManualsDir.com - online owner manuals library. Pro-Ject Audio Systems manuals. Download 114 Pro-ject audio systems Turntable PDF manuals. User manuals, Pro-ject audio systems Turntable Operating guides and Service manuals. Manualslib has more than 114 Pro-Ject Audio Systems Turntable manuals. Click on an alphabet below to see the full list of models starting with that letter. Pro-Ject DEBUT III PHONO SB.
Advertising
Pro-ject Debut Carbon Usb Manual
© Audio Trade GmbH · Pro-Ject Debut Carbon Esprit / Ortofon 2M Red · Revision 2012.11.15
5
Mains power connection
Connect the mains lead to the mains.
Fitting the lid
Fit the lid (dust cover 10) carefully over the hinge prongs and adjust the screws (12) until the lid stays open
where you want it to without being too stiff to open or close.
where you want it to without being too stiff to open or close.
Switching on and off
Pressing the power switch (19) alternately starts or stops the motor.
Changing replay speed
To play records at 45 r.p.m. first remove the platter (5). Using the accessory tool provided (3a), hook the belt
(3) over the larger diameter part of the motor pulley (2). Refit the platter. To revert to 33 r.p.m. repeat the
(3) over the larger diameter part of the motor pulley (2). Refit the platter. To revert to 33 r.p.m. repeat the
proceedings using the smaller step on the pulley.
When the Pro-Ject Speed Box SE is used speed change between 33 and 45 r.p.m. is electronic. There
is no need to move the belt manually.
is no need to move the belt manually.
*** In addition, 78 r.p.m. is available after fitting a special pulley, which may be purchased as an
optional extra.
For detailed product information please refer to the Pro-Ject web site
optional extra.
For detailed product information please refer to the Pro-Ject web site
www.project-audio.com
.
Useful tips
The record player should be positioned on a low-resonance surface such as wood or multiple layer ply board
to avoid structural vibrations disturbing replay.
to avoid structural vibrations disturbing replay.
Pro-ject Debut Carbon Manuale Italiano
Adjusting the azimuth
** The cartridge needle must be vertical in the record groove in order to trace the
groove wall modulations correctly.
A small screw at the bearing end of the arm allows incorrect azimuth to be
groove wall modulations correctly.
A small screw at the bearing end of the arm allows incorrect azimuth to be
corrected if your needle is not mounted exactly perpendicular to the cartridge body
(which is often the case).
Slacken off the screw just enough to be able to revolve the arm tube without
applying force. Please note: do not remove the screw completely!
(which is often the case).
Slacken off the screw just enough to be able to revolve the arm tube without
applying force. Please note: do not remove the screw completely!
Screw
With the aid of a good magnifying glass adjust the needle until it is vertical in the groove (i.e. perpendicular
to the record's surface). Ideally this should correspond to the top surface of the cartridge body being parallel
to the record surface.
When you are satisfied that the needle is vertical retighten the screw carefully.
to the record's surface). Ideally this should correspond to the top surface of the cartridge body being parallel
to the record surface.
When you are satisfied that the needle is vertical retighten the screw carefully.
Pro Ject Debut Carbon Manual
Please note: Under no circumstances should the arm tube be adjusted with the needle still in the
record groove! Irreparable damage may be caused to the cantilever suspension! The arm must be
lifted to make each adjustment and lowered afterwards to check it.
lifted to make each adjustment and lowered afterwards to check it.
Pro Ject Debut Carbon Walnut
Advertising
Popular Brands
Popular manuals